PRODUCTS

PRODUCTS

产品详情

HLSG 600


HLSG600

The HLSG is a_high shear mixer granulator designed forthe dry mixing of powders and wet granulation.Mixing and agglomeration of powder particles are achieved by the combined action of the impeller and chopper and liquid binder distribution System.lt is supplied in a through the

wallrversion,and by locating all the auxiliary equipment in a technical area optimizes the room layout according to GMPs and safety regulations.















   


With the increase of the requirement for the production and development equipment of highly isolated powder treatment, granulation, tablet press, capsule filling and coating, SMA launched the laboratory and production highly isolated containment solid preparation line in time to meet the market demand.


The design of containment equipment must be a risk-based solution which needs a preliminary analysis of key and potential risks for pharmaceutical processes and factory conditions, regulations, layouts, and industrial objectives.


The inlet and outlet of the highly active powder is conducted through the sealing αβ valves. The containment cavity adopts the inflatable sealing, and does not deflate after power off, ensuring complete sealing and production area isolation.


The containment cavity is made of stainless steel AISI304, and the micro negative pressure is maintained during production.

 

The side door is automatically locked and tested when the machine is turned on, and inflatable sealing is used to prevent operators from being hurt by wrong operation.

 

Clean air passing through primary, medium and high efficiency filters will be sent to the host machine by the pressure fan; the exhaust air disposed by the high efficiency filter through the dust collector and the bag-in-bag-out system and will be discharged to outside. During the whole production process, the host machine cavity is kept with a micro- negative pressure of about -50pa.

 

All parts in contact with the product will be moistened or cleaned online with more strictly and complex principle before removal according to operational risk control analysis.